> > Page 2 of 6

Products

Sold out
Evaporating Wax (cyclododecane) - Wax-like material that evaporates without melting

Evaporating Wax (cyclododecane) - Wax-like material that evaporates without melting

€12.00
Expandable Graphite - Expands to several hundred times its volume when heated

Expandable Graphite - Expands to several hundred times its volume when heated

€15.00
Expanded Glass Beads - Lightweight beads with good thermal insulation properties

Expanded Glass Beads - Lightweight beads with good thermal insulation properties

€12.00
Expanded PTFE Gasket - Pliable material with high heat and chemical resistance

Expanded PTFE Gasket - Pliable material with high heat and chemical resistance

€8.00
Expansion Wax - Expands 15 percent when melted

Expansion Wax - Expands 15 percent when melted

From €10.00
Explosive Cladding - Dissimilar metals are joined by an explosion

Explosive Cladding - Dissimilar metals are joined by an explosion

€12.00
Sold out
Extremely Thin Glass - Very flexible glass that is thinner than a human hair

Extremely Thin Glass - Very flexible glass that is thinner than a human hair

€14.00
Extrusion Blow Moulding - Commonly used process to produce hollow shapes

Extrusion Blow Moulding - Commonly used process to produce hollow shapes

€12.00
Fibre-Reinforced 3D Printing - Embedded fibres dramatically improve the stiffness

Fibre-Reinforced 3D Printing - Embedded fibres dramatically improve the stiffness

€12.00
Flocked Foam - Foam with a very soft and pleasant surface treatment

Flocked Foam - Foam with a very soft and pleasant surface treatment

€12.00
Fluoroelastomer (FKM) - High-performance elastomer with good chemical resistance

Fluoroelastomer (FKM) - High-performance elastomer with good chemical resistance

€10.00
Fluted Polypropylene Sheet - Tough and lightweight polypropylene sheet

Fluted Polypropylene Sheet - Tough and lightweight polypropylene sheet

€5.00
Foam Bonding Tape - Strong resilient tape

Foam Bonding Tape - Strong resilient tape

€10.00
Freeform Injection Moulding (FIM) - Plastic injection moulding in 3D printed dissolvable moulds

Freeform Injection Moulding (FIM) - Plastic injection moulding in 3D printed dissolvable moulds

€12.00
Fresnel Lens Film - Thin film creates the illusion of depth and movement

Fresnel Lens Film - Thin film creates the illusion of depth and movement

€12.00
Sold out
Gallium - Melts at just 29.77°C

Gallium - Melts at just 29.77°C

€11.00
Gelled Hydrocarbon - Oils turned into gels

Gelled Hydrocarbon - Oils turned into gels

€10.00
Glass Fibre Board - High-strength board made from glass fibre scrap material

Glass Fibre Board - High-strength board made from glass fibre scrap material

€12.00
Glass Flakes - Very thin glass flakes with consistent thickness

Glass Flakes - Very thin glass flakes with consistent thickness

From €8.00
Glass Foam - Lightweight foam with excellent heat insulation properties

Glass Foam - Lightweight foam with excellent heat insulation properties

From €14.00
Heat-Mouldable Textile - Can be permanently shaped with hot air

Heat-Mouldable Textile - Can be permanently shaped with hot air

€10.00
Heat-Shrinkable Fabric Tubing - Fabric tubing that shrinks by 50 % when heated

Heat-Shrinkable Fabric Tubing - Fabric tubing that shrinks by 50 % when heated

€12.00
Heating Mesh - Mesh that heats up when voltage is applied

Heating Mesh - Mesh that heats up when voltage is applied

€10.00
Heatshrink Solder Sleeve - Connects wires electrically and mechanically

Heatshrink Solder Sleeve - Connects wires electrically and mechanically

€10.00
Hooks for Exhibition Boards

Hooks for Exhibition Boards

€5.00
Hot Melt Strippable Coating - Protective coating that is easily applied and removed

Hot Melt Strippable Coating - Protective coating that is easily applied and removed

From €15.00
Hydrophobic Acoustic Mesh - Allows air to pass, but stops water

Hydrophobic Acoustic Mesh - Allows air to pass, but stops water

€12.00
Impact Indicator - Indicator that monitors shocks exceeding a set limit

Impact Indicator - Indicator that monitors shocks exceeding a set limit

€11.00
Sold out
In-Mould Graphics - Graphics are integrated into rotational moulded parts.

In-Mould Graphics - Graphics are integrated into rotational moulded parts.

€15.00
In-Mould Labelling (IML) - Labels moulded into plastic surfaces

In-Mould Labelling (IML) - Labels moulded into plastic surfaces

€12.00
Intumescent Foam - Foam that expands when burned

Intumescent Foam - Foam that expands when burned

€12.00
Knitted Metal Mesh - Easy-to-manufacture metal wire mesh

Knitted Metal Mesh - Easy-to-manufacture metal wire mesh

€10.00
Laminated Shim - Solid plate constructed from thin sheets

Laminated Shim - Solid plate constructed from thin sheets

€10.00
Laser Engravable Rubber - Can be engraved with fine details

Laser Engravable Rubber - Can be engraved with fine details

€10.00
Laser Transfer Decoration - Selective transfer of a metal layer to a substrate

Laser Transfer Decoration - Selective transfer of a metal layer to a substrate

€12.00
Sold out
LED Film - LEDs light up with invisible wiring

LED Film - LEDs light up with invisible wiring

€12.00